Search:

Ah, so if it see's movement continuously the 3 minutes does not time out. Hence my perceived problem.

I have not got round to reading the RFXCOM visonics manual fully yet.

Thanks for the info

Hi Keith,

I was wondering about the filtering of "Ambient Noise" myself.

If I get up and walk it only works when it is not locked out. Otherwise yes it works ok.

Do you have the BT system? ...

Hi All,

I am wondering if anyone would be able to help me.

I have recently purchased a VP1000 PIR to try with my RFXCOM Antenna for occupancy detection.

I am having a problem, because the...

lol, no you are probably right!

Kaliedoscope do one but it is expensive.

You may find that building one yourself is the best option.

1 Terrabyte is not much really, how many dvd's do you have / want to store and in what...

You could do this easily if you had a pc at each network point! ;-)

I would be interested to see if such a product exists. Wonder if there is a gap in the market for this.

Other thing you...

I programmed my kevin lo stuff I received ok froma cm12. it was a bit tricky thou.

Unfortunately, we are stuck with x10. Althou zwave is starting to make an appearance. It is available from the uk, and is now ce approved I beleive. but x10 is still the best choice for your...

No sure if from what you say if you a diagnostic type program of something to read the data, if you need the former see system internals website, they have a port monitoring profram freeware for...

Ok, funny... Were's my keys gone!

:?: How come you postage cost's are so high!?

I recently posted some speaker stands Atacama Nexus 6's 60 cm high for little more than that. They were 8 kg each.

http://search.ebay.co.uk/search/search.dll?sofocus=bs&sbrftog=1&fstype=1&catref=C6&from=R10&satitle=KWH+meter&sacat=-1%26catref%3DC6&bs=Search&sargn=-1%26saslc%3D3&sadis=200&fpos=BN3+4AE&ga10244=10425...

You could buy a power meter and see which is the culprit.

Do you have any other stuff like controllers?

I actually just reprogrammed mine to find out how to do it for you!

1. Press the button till the led blinks then remains on, the light attached to it will also come on.

Mine is a dual appliance...

If I recall you have to send all the discrete codes you wish to use in sequence once you start programming the device.

I think I had to send an A1 On, A2 On, in close sucession.

I found the device I brought a bit fiddly to set up too, unfortunately I can't remember what I did in the end!

I certainly had several attempts at it, sorry for being so vague.

Thanks for the info

Interesting links I would be interested to know if anyone has used that firmware?

Hi,

I use NetRemote and Girder to play all my AVI's and DVD Rip's. I store them on a server which has a 1.75Tb raid 5 array. This also houses my music which is fed to my AV amp for multi zone...

Are you sure you are allowed to use 315MHz in the UK...?

I know 433MHz is ok, but am not sure about 315MHz, I thought that was for use by aeronautical navigation equipment.

May be worth...

Yep, your right. The frequency used in the states is different to ours.

I expect you know there mains voltage is different to. 110V at 60Hz

This may help you
http://x10-hk.com/ebay/manual/2264E.pdf

The datasheet does not detail if they should be momentary or not however the configuration drawing shows toggle type switches.

Hi,

Not sure about the dim of these devices, but for the appliance type micro modules yes a standard on/off wall switch will work fine.

Do you have a link to kevins data sheet for the dimmable...

Hi,

I have a double applicance micromodule from Kevin, it seems great so far.

You can use "toggle" type switches, momentary will not work well at all.

Regarding your second question surely...