Controllis were doing a 240v blind which can be switched using two relays on a QRH, I have two blinds like this. However they have become very expensive of late.
The last blind I purchased was...
Type: Posts; User: neilhooper
Controllis were doing a 240v blind which can be switched using two relays on a QRH, I have two blinds like this. However they have become very expensive of late.
The last blind I purchased was...
Paul,
I use the Scheduler to Save the Database every two hours as I found that the History is not kept unless you do a periodic Save. When you Save, a Backup copy of the Database appears in your...
If the log is in the XFX > xfx-express hub folder there doesn't appear to be any log file there.
Yes, the service version will now not function at all; the console version has been running since...
No reboot overnight, only one Network interface.
This is very strange as it doesn't happen on a reboot or startup it just happens randomly like it did this morning. It was working fine at 9.10...
Hi Kevin / Brett,
I've been waiting for it to happen again and it did this morning. I don't think it is anything to do with iServer as it was still showing as receiving messages. However when I...
Hi All,
I don't know if anybody is reading these forums anymore but here's hoping.
I didn't know whether to post here or in the xAP forum but I may try both.
The problem that I'm having is...
Are you wanting to do white or RGB or both. I do both but mainly RGB (currently running at 50m and counting) and the explanation is different for either type.
- Neil
I've been doing this for the last four years using a combination of QRI's, QAO's, LT-393-5A's and the unit in the above post. It's quite a long and drawn out explanation of how to do it but it is...
Current situation is this.
Sky HD located at node 0 with HDMI via single cable Cat5 sent to five TVs around the house, also Sky + distributed to same TVs via RF. All locations have 'Sky Magic...
Tim,
Thanks for the info looks OK but doesn't quite fit the bill. I've just re-read my opening post and I don't think it makes it clear that I want a many to one system and it doesn't look like...
Hi All,
With the upcoming price hike from Sky we are probably going to ditch it and change over to BT or similar.
Does anyone know / have experience of an IR system that can be used from all...
Hi All,
I've been searching around for a way of attaching pattresses to Din Rail for use with anything that requires mounting in a pattress but haven't found anything at a reasonable cost in this...
Hi All,
I've been searching around for a way of attaching pattresses to Din Rail for use with ODI, QAI, QAO etc but haven't found anything at a reasonable cost in this country so I decided to...
I'd give up on X10. I did years ago, endless problems when one minute it would work and the next it wouldn't. Installed Idratek, never looked back.
Unpowered:-
between C and - terminal : OL
between NC and - terminal : OL
For Completeness
Powered but not connected to module:-
Inactive between C and - terminal 19Mohms
Active between C and...
C > 0v
NC > Input
Although I hadn't mentioned it I had tried it on a different input on the same module but not a different module.
One of my modules with spare inputs is tucked away in another part of the house...
Voltages at the IDRATEK module are:
Active 3.2
Inactive 1.2
the PIRs that are connected to this module are Dining PIR Right, Dining PIR Left and Rear Hall PIR. Dining PIR Right is the...
I've tried with the switch set to both positions and with the connections reversed. I've even tried the 'Invert' option within Cortex all to no avail.
Also I've just done some testing on one of...
Connections are good.
Power supply is good.
Resistance when PIR active is 0 ohms meter is actually reading 0.L i.e. no connection
When it changes to inactive the meter immediately changes to...
Hi All,
I'm having a problem with some new PIR's, https://www.security.honeywell.com/uk/documents/HSC-IS215T-02-EN_DS-Z.pdf
For some reason when I connect them in the normal way and when they...
Karam,
I've been playing this morning and connected the resistor and I'm now getting 2.65v; is this low enough or do I need the diode, if so can I use a BAT43 instead as I can pop to Maplins and...
Karam,
I've wired it up as per your suggestion and I've checked the yellow wire and I'm getting approx 5.5v with fluctuations of +/- 0.1v.
Does this mean that I can't use it with a QRI or do I...
Hi All,
I have a water flow sensor that has the following spec:
•Pulse output frequency (Hz)= 4.1 x Q where Q=volume flow rate in L/min
•Connections: RED (positive), BLACK (negative), YELLOW...
Hi Chris,
I did exactly as Gumby suggested.
I already have an Outside Light Level sensor. The connections / outputs are mostly configured to work with the modules / objects in the Lounge which...