I now have quotes for a new combi boiler from the guy who installed my Evohome system. He normally recommends Worcester/Bosch due the guarantee and excellent after sales support. He has no experience...
Type: Posts; User: filbert
I now have quotes for a new combi boiler from the guy who installed my Evohome system. He normally recommends Worcester/Bosch due the guarantee and excellent after sales support. He has no experience...
Have you added the controller ID? The guide says it's optional but it isn't. I wss getting nothing showing until I added it. It's covered higher up in this thread.
Yes, I think I misunderstood the first discussion. His suggestion is 2.5 bar.
@G4RHL - Thanks for the detailed and helpful reply. My Evohome guy came out and we had a sensible discussion about boilers, flow temperatures, reducing the power, etc. He checked the pressure without...
Interesting, my installer is happy with his experiences with Worcs/Bosch (and uses it in his own home) and has had problems with Baxi. He's no experience of Intergas.
What makes you say what you...
How hard is it to set these things up? If my plumber isn't trained on Intergas but knows Evohome, could he & I work it out or should he stick to the stuff he knows (ie Worcester).
I'm not even...
There are a few threads covering this already (see below). Intergas is often mentioned.
I'm in the same boat, except that I have Evohome already installed.
My problem is finding an installer....
Maybe... but I get occasional complete loss of comms on all zones and I haven't been able to isolate any specific cause. It happens randomly every few months. Everything recovers by itself after an...
Thanks, that looks straightforward. I'll give it a go!
I’m assuming that I can get Domoticz to notify me when Evohome gets a fault entry in its log. Battery low, comms fault, etc. I’ve looked through the wiki and, as far as I can understand it, it’s...
We have a microwave but the problem is so intermittent that I can’t believe it is implicated - it’s also a different one to the one we had when I first noticed the problem. Nothing else uses wifi,...
I've been doing RF Comms checks on some of my devices after getting comms faults. That issue's resolved but I'm not sure I understand how the comms check works. I know how to go into the settings...
This has happened again a few times since my last post in Jan. Rebooting the controller seemed to resolve it previously. I also noticed, from the log, that it seemed to have happened last month and...
When I did a reset on mine, they lasted 2.5 hours and that’s with the original (2017) batteries. See this post:...
Thanks but I'm not sure I understand. I seem to have two entries for every device id which also correspond to my zones. However, where I have a T87RF (two zones) I can't see anything that looks like...
Ta, I can see how it works, was just hoping that someone else had already done it. Am confused by the duplication of codes and names but will start a new thread about that as I don't want to muddy...
Have just dumped a pile of log entries into Excel from Domoticz. I'd like to split them up so I can look at them and, to save me reinventing the wheel, I wonder if anyone has written an Excel...
To answer my own question, no, Python isn't required. I think it's for plugins.
Anyway, delighted with the little gadget. Struggling a bit with Domoticz but that's off topic for this thread :)
I'd be happy to do so but can't see any way of getting a login to use the editor. It says I can't use my forum login but doesn't, as far as I can see, provide any way of getting an account.
The wiki needs updating as well. There doesn't seem to be an option to ask for a user id with edit access so I assume it is restricted to those that know what they're doing :(
I hadn't entered the controller ID, the wiki says it's optional. Now I have and things are showing up. Thanks for the tip. Obviously, not as optional as implied.
Now there's a lot of info to...
I think that depends on how noisy the individual HR92 is. We never got used to the noise of the one I swapped over, even after over a year - it never failed to wake me up. The one I swapped it with,...
Last year, when we had to swap bedrooms because of building work, I noticed that the HR92 in the spare room seemed much less intrusive than the one in the master bedroom. I've swapped them over and...
I've been looking though it, thanks, but I'm not making a lot of progress. There's a lot there about installing the drivers but Bruce_M says they're not needed with the SSM(R).
I have managed to...
OK, thanks. I'm struggling with Domoticz, then. I'll dig around and see what advice there is here.