Search:

Type: Posts; User: minthemerciless

Search: Search took 0.00 seconds.

  1. Excellent, got it working. Along with the cancel...

    Excellent, got it working. Along with the cancel override too. Thanks again.
  2. I have had a look at the domoticz code and I'm...

    I have had a look at the domoticz code and I'm finding it very hard to decipher how the date and time are formatted for a time based setpoint override. Could you give a me a description of how it's...
  3. I had a dig around in the Domoticz source and...

    I had a dig around in the Domoticz source and found some of the decoding stuff. Managed to get the override working. I can now set overrides for each room from the node red dashboard with a slider....
  4. Are the additional flags at the end of the...

    Are the additional flags at the end of the massage used to set the timing for the override?
  5. Ooooo, excellent :) can this be sent from a...

    Ooooo, excellent :) can this be sent from a hgi80 with the same ID as the schedule request (18:740) or does it require a specific ID?
  6. No, I had not seen that. But I have implement a...

    No, I had not seen that. But I have implement a significant amount of that functionality in Node red with function nodes and switches. I have been able to read data and put in into influxdb for...
  7. @DanD , Thanks for your help. I'm very grateful...

    @DanD , Thanks for your help. I'm very grateful :)


    I have now have a python script that I can trigger from node red with a pythonshell node. I can request the schedule for a zone, then...
  8. Got a simple python script working that can be...

    Got a simple python script working that can be called from the command line with the concatenated hex data as an input. Need to get it working on my Pi with Node Red.

    Thanks for the help DanD
  9. As simple start, would you expect this to work or...

    As simple start, would you expect this to work or do I need to do something else with the input?



    import zlib
    data_in =...
  10. @DanD Yes, that is correct :) on to getting...

    @DanD

    Yes, that is correct :) on to getting the decoding working.
  11. @DanD No, the spaces don't indicate the ends...

    @DanD

    No, the spaces don't indicate the ends of messages. I think that was a copy paste issue. My raw messages look like this



    045 RQ --- 18:730 01:172240 --:------ 0404 007 02200008000100...
  12. In the zlib version I have, there isn't a...

    In the zlib version I have, there isn't a decompress method. Is this because it's a newer/older version? Is there a newer version of decompress? This is my data:
    ...
  13. @DanD, very useful link, thanks. So I'm...

    @DanD, very useful link, thanks. So I'm reasonably confident with my data. I now need a way of decompressing the data. On to the next stage.
  14. @DanD I'm currently using the Python code as a...

    @DanD

    I'm currently using the Python code as a template/ guide to implement a similar thing in Node Red. I would like to be able to implement the backup/ restore functionality through Node Red. ...
  15. Now I can retrieve what I believe to be schedule...

    Now I can retrieve what I believe to be schedule data, my next challenge is to decode it. The first 14 nibbles look to be very similar to the payload of the request. Based on the...
  16. Hello again, I have finally managed to get my...

    Hello again,

    I have finally managed to get my controller to respond with schedule info. Yay! It looks like the address was the issue. When I tried it before I had changed my node red flow and...
  17. Hi Dan, I have tried sending the data below over...

    Hi Dan, I have tried sending the data below over serial to HGI80, expecting a response from the controller but had no such luck.

    "RQ --- 18:730 01:172240 --:------ 0404 007 00200008000100"
    ...
  18. Hi all, I haven't posted here but have been...

    Hi all,

    I haven't posted here but have been reading this thread for quite a while. If I'm asking in the wrong place, feel free to redirect me, but this seems like a good source of knowledge. I...
Results 1 to 18 of 18