The KD101, FA20RF and Alecto SA30 smoke detectors are supported by the RFXCOM RFXtrx433E.
Use a VERA, Domoticz, DomotiGa or Homeseer to display the status and send an alarm message to your phone. ...
Type: Posts; User: b_weijenberg
The KD101, FA20RF and Alecto SA30 smoke detectors are supported by the RFXCOM RFXtrx433E.
Use a VERA, Domoticz, DomotiGa or Homeseer to display the status and send an alarm message to your phone. ...
Yes, the RFXtrx433E can be used with Indigo on a Mac.
There are also some other Home Automation programs that can be used:
-Domoticz or DomotiGa (on a Raspberry PI)
-Homeseer
-EventGhost...
Other systems that support Z-Wave and LightwaveRF (and more):
www.homeseer.com
www.domoticz.com
www.domotiga.nl
www.openhab.org
www.eventghost.org
The DS90 is an X10 security sensor and is received as Type: Security1, Sub type: X10 security door/window sensor.
Another option are the HomeEasy (AC) door/window sensors. These are cheap but have...
For door/window sensors you could also use X10 DS90 sensor and use an RFXCOM RFXtrx433 to receive those sensors.
With the RFXtrx433 you can also control LightwaveRF and HomeEasy and receive Oregon...
try this: http://www.marmitek.com/en/support/product-information/software.php?search=CM11&send=Send
These keyfobs can be used:
X10 KR21 keyfob http://www.uk-automation.co.uk/products/Marmitek-Key-Chain-Remote-for-Security-Systems.html
HomeEasy...
Firmware version 71 in the RFXCOM RFXtrx433 supports now:
RGB LED strip controller
This one has a learn option and any ID can be used.
http://dx.com/p/rf-remote-touch-rgb-controller-130913 ...
I suppose the HE851 transmits 3 protocols:
the older ARC/AB600 protocol, the AC HomeEasy UK protocol and the newer HE800 protocol.
The ARC and AC protocols are supported by the RFXtrx433. The...
Contact RFXCOM for the RFXtrx SDK.
There are also some Open Source Home Automation implementations available like: EventGhost, DomotiGa, Domoticz, Domogik, Homidom, Ed-Win, OSA, FHEM
You can use this forum for LightwaveRF questions : http://lightwaverfcommunity.org.uk/forum/
The LightwaveRF WiFi-link is the best solution if you want to switch lights on/off.
Use a system like Domoticz,Homeseer,Indigo,DomotiGa... if you want Home Automation and:
- that does not rely on...
If you are able to install Wheezy and Domoticz using the Wiki instructions you can order the RFXtrx433 also in the UK at:
http://www.vesternet.com/rfxtrx433-usb-433-92-mhz-transceiver-with-antenna...
1 You can install Wheezy and Domoticz on the Raspberry PI. The installation procedures are in the Domoticz Wiki.
Or buy the RFXtrx433 + 4GB SD card and plug the SD card in the Raspberry PI and you...
Have a look at http://www.domoticz.com/
With the RFXtrx433 you are able to control LightwaveRF, HomeEasy, ByeByeStandby, Beckermotors, many others...
And receive Oregon, TFA, LaCrosse sensors .......
Raspberry PI + RFXCOM RFXtrx433 +Oregon Scientific sensors + http://www.domoticz.com/
With this system you can log temperatures, humidity, wind, rain.
You can also access the system from remote....
Domoticz is free and supports also sensors and LightwaveRF and runs on the Raspberry Pi
www.domoticz.com
The following Open Source programs (not necessarily Linux) will support the RFXtrx433:
www.domogik.org
www.domoticz.com
www.domotiga.nl
www.eventghost.org/forum/viewtopic.php?f=9&t=3801 ...
It's almost Christmas and after a month of development gizmocuz has released his very nice and easy to use Home Automation system "Domoticz" !
The system is almost finished. The Event system is...
LightwaveRF lighting modules and remotes are supported by the RFXCOM USB RFXtrx433.
And also HomeEasy can be used in a mixed configuration together with weather sensors like Oregon, TFA and La...
Or use a Linux system with DomotiGa, a Windows system with Homeseer or a Micasaverde VERA. This supports Z-Wave.
Add the RFXtrx433 http://www.rfxcom.com/transceivers.htm#12103 and you can use also...
here is a large list of HA software http://www.cocoontech.com/portal/lists/home-automation-software
This announcement was done by Indigo:
An exciting new plugin, just released as a public beta, supports RFXCOM's new RFXtrx433 controller. This is a multi-protocol RF transceiver that communicates...
I receive the PowerCode sensor with the RFXCOM receiver.
To synchronize the VP1000 panel state with Homeseer I use X10 commands. Configure the VP1000 to send for example X10 B1-on for arm-away and...
Possible solutions:
1 use a Homeseer Hometroller or a VERA with the new RFXtrx433
http://www.micasaverde.com/
http://forum.micasaverde.com/index.php/topic,9563.0.html
2 iPad is supported by...