Search:

I picked up a Center 340009 on eBay, which is a cheaper alternative. https://www.wolseley.co.uk/product/center-rf-non-programmable-room-thermostat/

Also known as EHE0200364. There's a new one on...

Nope.
Currently you cannot set a time schedule to the commands. Zone commands to evohome Wi-Fi and Single Zone Thermostat will operate until the next schedule. For example, you cannot say “Alexa...

@robbietobbie Do you have Alexa? There's integration with Alexa and I ask Alexa to turn up the temperature in that room, which Evohome will keep until the next set point. I have a set point at...

Talking of TPI, I assume this TPI in action from 18:45 onwards?

https://i.imgur.com/WjpdWPJm.jpg

TIA

Happened to me after 4 months following installation. Shot up to 66 degrees C. Showed the temp graphs to my installer who replaced the probe that goes to the cylinder and it's been fine since. So...

Are you on the beta firmware? I'm not on beta, and don't see an icon; only a message:

https://i.imgur.com/nDVy92Wm.jpg

I have these probes shoved down the foam insulation which wraps around the flow and return pipes above my boiler:...

Test email works. I don’t understand why Notifications don’t.

Although set up, I never receive emails from Domoticz.

https://i.imgur.com/x9L4SFu.png

What's the trick, bruce?

I have Samsung Smartthings and added (non-Samsung) smoke and gas detectors which sound and also notify via the app when triggered.

https://i.imgur.com/5vKwEP6l.jpg
...

Good point, G4RHL. My kids are nocturnal and they have a tendency to up their room temps in the early hours so when they're back from uni I have to set the first time slot from 00:00 to 03:00 for...

Are you sure you want on/off sequence rather than the number of temperature set points during the day? What system are you talking about?

In Evohome there are are 6 set points available for each...

It could be the temperature sensor/probe itself i.e. the temp sensor that connects by wire to the CS92A? My probe was reading 66 degrees C 4 months after a new install.
...

Got the same email. Yes, untrue. Servers down since 1am according to my Domoticz set up.

Drill down to the next level?
https://i.imgur.com/BorcORb.jpg

If it ain't broke, don't fix it?!? It's a mature, solid, first class functional product that others are trying to re-invent. What additional functionality are you looking for?

Can be found under a resideo.com subdomian:
https://homecomfort.resideo.com, under Products > Home Comfort > Zoning control

You're supposed to turn the black ring fully anticlockwise
https://ensupport.getconnected.honeywellhome.com/s/article/How-to-install-the-HR92-Radiator-Controller?language=en_US

Have a look here: http://codersaur.com/2016/04/smartthings-data-visualisation-using-influxdb-and-grafana/ and...

I have Smartthings which I integrated with Evohome. Using various tutorials I was able to chart the the heating/idle times of the zones:

https://i.imgur.com/fW1zV4ym.jpg

So spanning over an hour and half, you tracked the on off times of the boiler and the UFH pump, along with the noted boiler %ge, manually? if so, fair play to you!

How are you extracting the data for the plots please? Are they direct from Evohome? I can chart zone temps and changes from idle to heating via InfluxDB in Smartthings. I would like to track...

"Lightwave and Resideo, which have both adopted the same 863.0 MHz radio frequency for device communications, have agreed to share their proprietary radio protocols to integrate existing technologies...

Same. Lost and restored emails since 04:01 this morning. Last restore was 14:10.

The system you have will also impact on whether to go OpenTherm. If you have a S or Y plan system - have a look at this (registration required):...