Results 1 to 3 of 3

Thread: Digital Coax over Cat5e

  1. #1
    Automated Home Jr Member trevorjdaniel's Avatar
    Join Date
    Jan 2005
    Posts
    39

    Default Digital Coax over Cat5e

    Hi There,

    Does anyone know if it's possible to put the output from a Digital Coax plug on a PC over Cat5e? And obviously, at the destination, convert it back to the correct plug type again?

    If it is, can anyone point me in the right direction of the hardware i need?

    Thanks

    Trev

  2. #2
    Automated Home Legend TimH's Avatar
    Join Date
    Feb 2004
    Location
    UK
    Posts
    501

    Default Re: Digital Coax over Cat5e

    Trev,

    Are you looking to transfer a digital audio signal?
    If so then the 75ohm video channel on Katman's KAT5 units would be a good solution.

    See http://www.laser.com/?page=shop/flyp...031063cb04eb9&
    for more info, or the KAT5 forum here on Automated Home :-)

    Note that this isn't a "streaming" solution via IP / Ethernet etc. but a point-to-point link over a Cat5 cable.

    HTH,

    Tim.

  3. #3
    Moderator toscal's Avatar
    Join Date
    Oct 2005
    Location
    Near Alicante Spain
    Posts
    2,010

    Default Re: Digital Coax over Cat5e

    Abitana do a High Definition Component Video + S/PDIF Audio 4xRCA to RJ45 adapter (YPbPr+S/PDIF) have a look on their webshop. www.abitana.com/webshop/ .Then on the left hand side select adaptors.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •