Results 1 to 2 of 2

Thread: PLEASE HELP: SC2800 Alarm and X10 light control???

  1. #1
    Automated Home Lurker
    Join Date
    Apr 2004
    Posts
    8

    Default PLEASE HELP: SC2800 Alarm and X10 light control???

    Guys,

    I have a Marmitek SC2800 alarm system with the house code set to 'M'. All my lights are set to 'M' (via LW10's).

    For some strange reason as soon as I arm the system, M2 (living room light) comes on and stays on???? When the alarm is triggered ALL lights flash as expected (including M2) but why does it stay on when the alarm is armed???

    One thing I have noticed is that it only does it for 'Arm Away', it's fine for 'Arm Home'


    All help very much appreciated, I'm very stuck!!!

    Thanks
    Stace

  2. #2
    Automated Home Lurker
    Join Date
    Aug 2004
    Posts
    2

    Default Re: PLEASE HELP: SC2800 Alarm and X10 light control???

    Hi.
    Could it be possible that the address that stays on is the module from "alarm status"?
    During your (being outside )alarm is activated this lamp will stays on.
    Maybe this will do the trick, read the manual from marmitek somewhere on the bottom of the manual you wil find (changing unit code)

    Good luck.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •