PLEASE HELP: SC2800 Alarm and X10 light control???

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • stace
    Automated Home Lurker
    • Apr 2004
    • 8

    PLEASE HELP: SC2800 Alarm and X10 light control???

    Guys,

    I have a Marmitek SC2800 alarm system with the house code set to 'M'. All my lights are set to 'M' (via LW10's).

    For some strange reason as soon as I arm the system, M2 (living room light) comes on and stays on???? When the alarm is triggered ALL lights flash as expected (including M2) but why does it stay on when the alarm is armed???

    One thing I have noticed is that it only does it for 'Arm Away', it's fine for 'Arm Home'


    All help very much appreciated, I'm very stuck!!!

    Thanks
    Stace
  • Osklivy
    Automated Home Lurker
    • Aug 2004
    • 2

    #2
    Re: PLEASE HELP: SC2800 Alarm and X10 light control???

    Hi.
    Could it be possible that the address that stays on is the module from "alarm status"?
    During your (being outside )alarm is activated this lamp will stays on.
    Maybe this will do the trick, read the manual from marmitek somewhere on the bottom of the manual you wil find (changing unit code)

    Good luck.

    Comment

    Working...
    X