Problems w/ Apollo 80c Boiler

[jakearnold_uk]

Hi there,

I recently had the thermocouple sorted on my boiler and it was working fine. However when I got in this after noon, I thought I'd put on the central heating and it wasn't firing.

When I skip the cycle for the Hot Water the boiler kicks off and works normally, but it wont do the same for central heating.

There's a switch on the actual boiler (HIGH --- O --- LOW) and I've got it set on high.

On the control panel I've got settings for both hot water and central heating of:

OFF --- ONCE ---- TWICE ---- ON

Any help with this greatly appreiciated.

Cheers
Jake

[sunbeam]

Re: Problems w/ Apollo 80c Boiler

do you have a room stat?

is it turned up?

[jakearnold_uk]

Yeah, its turned up, 25 degrees which it certainly isn't in the flat!

[sunbeam]

Re: Problems w/ Apollo 80c Boiler

so if you have the clock set to on,for both central heating and hot water,

room stat up,

do you get central heating?

[jakearnold_uk]

Re: Problems w/ Apollo 80c Boiler

Hi there,

I got a mate around, and he had a look at it, seemingly the thermostat was broken. Got a new one fitted.

Many thanks all-