Hi there,

I recently had the thermocouple sorted on my boiler and it was working fine. However when I got in this after noon, I thought I'd put on the central heating and it wasn't firing.

When I skip the cycle for the Hot Water the boiler kicks off and works normally, but it wont do the same for central heating.

There's a switch on the actual boiler (HIGH --- O --- LOW) and I've got it set on high.

On the control panel I've got settings for both hot water and central heating of:

OFF --- ONCE ---- TWICE ---- ON

Any help with this greatly appreiciated.

Cheers
Jake