-
7th November 2006, 05:36 PM
#1
Automated Home Lurker
Problems w/ Apollo 80c Boiler
Hi there,
I recently had the thermocouple sorted on my boiler and it was working fine. However when I got in this after noon, I thought I'd put on the central heating and it wasn't firing.
When I skip the cycle for the Hot Water the boiler kicks off and works normally, but it wont do the same for central heating.
There's a switch on the actual boiler (HIGH --- O --- LOW) and I've got it set on high.
On the control panel I've got settings for both hot water and central heating of:
OFF --- ONCE ---- TWICE ---- ON
Any help with this greatly appreiciated.
Cheers
Jake
-
7th November 2006, 05:47 PM
#2
Moderator
Re: Problems w/ Apollo 80c Boiler
do you have a room stat?
is it turned up?
-
7th November 2006, 06:09 PM
#3
Automated Home Lurker
Yeah, its turned up, 25 degrees which it certainly isn't in the flat!
-
7th November 2006, 07:07 PM
#4
Moderator
Re: Problems w/ Apollo 80c Boiler
so if you have the clock set to on,for both central heating and hot water,
room stat up,
do you get central heating?
-
8th November 2006, 06:18 PM
#5
Automated Home Lurker
Re: Problems w/ Apollo 80c Boiler
Hi there,
I got a mate around, and he had a look at it, seemingly the thermostat was broken. Got a new one fitted.
Many thanks all-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules