Results 1 to 5 of 5

Thread: Problems w/ Apollo 80c Boiler

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Automated Home Lurker
    Join Date
    Nov 2006
    Posts
    3

    Default Problems w/ Apollo 80c Boiler

    Hi there,

    I recently had the thermocouple sorted on my boiler and it was working fine. However when I got in this after noon, I thought I'd put on the central heating and it wasn't firing.

    When I skip the cycle for the Hot Water the boiler kicks off and works normally, but it wont do the same for central heating.

    There's a switch on the actual boiler (HIGH --- O --- LOW) and I've got it set on high.

    On the control panel I've got settings for both hot water and central heating of:

    OFF --- ONCE ---- TWICE ---- ON

    Any help with this greatly appreiciated.

    Cheers
    Jake

  2. #2
    Moderator sunbeam's Avatar
    Join Date
    Feb 2006
    Location
    lancs
    Posts
    261

    Default Re: Problems w/ Apollo 80c Boiler

    do you have a room stat?

    is it turned up?

  3. #3
    Automated Home Lurker
    Join Date
    Nov 2006
    Posts
    3

    Default

    Yeah, its turned up, 25 degrees which it certainly isn't in the flat!

  4. #4
    Moderator sunbeam's Avatar
    Join Date
    Feb 2006
    Location
    lancs
    Posts
    261

    Default Re: Problems w/ Apollo 80c Boiler

    so if you have the clock set to on,for both central heating and hot water,

    room stat up,

    do you get central heating?

  5. #5
    Automated Home Lurker
    Join Date
    Nov 2006
    Posts
    3

    Default Re: Problems w/ Apollo 80c Boiler

    Hi there,

    I got a mate around, and he had a look at it, seemingly the thermostat was broken. Got a new one fitted.

    Many thanks all-

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •