help with x10 please

[Daznsaz]

Hi

Need help, this is the problem.
I am using a ProntoPro NG to control a TM13U and a 2027 (via the Tm13u).
I can get both to work fine, switch them on and off on there own.

If the socket on the front of the TM13U is turned on the 2027 stops responding to commands.

Again if the TM13U front socket is on and i send the Off signal to the 2027 nothing happens until i send the off signal to the TM13u then both the TM13u and the 2027 switch off.

[toscal]

Re: help with x10 please

Whats a 2027 as I don't recognise the number.
This may be a daft question, but is the 2027 plugged into the TM13 socket by any chance.

[Daznsaz]

Re: help with x10 please

The 2027 is another x10 module, one of the new rounded shape ones.

[toscal]

Re: help with x10 please

So the 2027 is an appliance module.
Whats plugged into the TM13 as this could be causing the problem.

[Daznsaz]

Re: help with x10 please

The fault happens with and without something plugged ito the TM13. Have Sent the TM13 back and they have returned it saying no problem.