room thermostat

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • intergard
    Automated Home Lurker
    • Dec 2006
    • 9

    room thermostat

    Hi does anyone have any advice on the best room thermostat to use with a worcester bosch 35cid please
  • sunbeam
    Moderator
    • Feb 2006
    • 261

    #2
    can't beat honywell,

    or tower the cheaper copy.

    Comment

    • intergard
      Automated Home Lurker
      • Dec 2006
      • 9

      #3
      Re: room thermostat

      Thanks for your reply which model do i need to fit my boiler thanks

      Comment

      • sunbeam
        Moderator
        • Feb 2006
        • 261

        #4
        Re: room thermostat

        do you have any instructions for the boiler?

        it will say either 240v or 24 v room stat.

        Comment

        • intergard
          Automated Home Lurker
          • Dec 2006
          • 9

          #5
          Re: room thermostat

          T hanks for your reply Sunbeam yes i do have instructions for the boiler which is a worcester greenstar 35cdi, it says it is a 230v thermostat, another question i am trying to find the answer to is can i adjust the automatic bypass valve on it or shoild i fit a seperate one,to help cut down system noise ie water flowing through the rads. Thanks

          Comment

          • sunbeam
            Moderator
            • Feb 2006
            • 261

            #6
            Re: room thermostat

            honywell 240v room stat it is then,

            i've always fitted a seperate one (honywell du145)

            Comment

            • intergard
              Automated Home Lurker
              • Dec 2006
              • 9

              #7
              Re: room thermostat

              Thanks for the info if i fit the DU145 do you think it will cure the noise in the rads i have, as the only time it stops when the heating is running is by turning on the hot tap, but it comes back two miutes after i turn it off,unless i leave it open slightly. I will get myself a honeywell cm67 or do you think another model would be better ? , thank you.

              Comment

              • sunbeam
                Moderator
                • Feb 2006
                • 261

                #8
                Re: room thermostat

                i would get myself a T6360

                i take it your going for the cm67 because it's remote,

                there's no harm fitting a du145,whether it will cure it or not is down to the system.

                Comment

                • intergard
                  Automated Home Lurker
                  • Dec 2006
                  • 9

                  #9
                  Re: room thermostat

                  Thanks Sunbeam i was advised by someone who has one to go for the cm67 but the wired in model, is the model you suggest any better/cheaper. I will get the abv fitted in hope it stops the noise many thanks.

                  Comment

                  • sunbeam
                    Moderator
                    • Feb 2006
                    • 261

                    #10
                    Re: room thermostat

                    the model i was going for is just a no frills room stat,

                    the cm67 is a super duper stat come programmer,

                    myself i like a room stat to be a room stat, if your room is to cold then turn up the dial, without having to go through the rigmarole of pressing a load of buttons.

                    you'll get a T6360 for around £10 - £15.

                    Comment

                    • intergard
                      Automated Home Lurker
                      • Dec 2006
                      • 9

                      #11
                      Re: room thermostat

                      Thank you very much for your help and advice, tend to agree about room stat will try and have one fitted. Regards Dave.

                      Comment

                      Working...
                      X