Hi,
I've been using Kat5 as a single point to point system for the last 6 years (Extremely good system and highly recommended)
I've recently bought a new Mark 2 transmitter and 4 receivers with the intention of setting up a multidrop system.
Having purchased some cat5 splitters I've found that their wiring configuration likely needs altering (only one side of the split works which makes sense as I uderstand all 8 wires are used in the KAT5 system.
Currently the splitter has the following configuration
Input wire 1 => Jack1 Wire 1
Input wire 2 => Jack1 Wire 2
Input wire 3 => Jack1 Wire 3
Input wire 4 => Jack2 Wire 1
Input wire 5 => Jack1 Wire 2
Input wire 6 => Jack1 Wire 6
Input wire 7 => Jack2 Wire 3
Input wire 8 => Jack2 Wire 6
To save me time can anyone confirm what the correct wiring should be (or is it simply 1-8 input => 1-8 on both jack 1 and jack 2)