-
13th December 2006, 09:08 PM
#1
Automated Home Lurker
BAXI PROBLEM NO CH BUT HAVE WATER
HELPPPPPPP !!!!!!!!!
I HAVE A BAXI 133 HE PLUS BOILER, THE HOT WATER WORK'S FINE AND BOILER LIGHTS UP. BUT THE CENTRAL HEATING DOES NOT WORK.
IVE BYPASSED THE THEMOSTAT & THE TIMER AND THESE ARE FINE.
GONG THROUGH THE HELP BOOK IT STATES IT IS THE PCB SO I HAVE REPLACED THAT. YET IT STILL WILL NOT WORK
IVE CHECKED ALL THE WIRING AND GETTING 240 IN THE RIGHT PLACES.
CHECK EVERYTHING AND ALL SEEMS FINE IVE EVEN CHANGED THE PCB TWICE TO MAKE SURE.
PLEASE PLEASE HELP AS ITS COLD
THE BAXI BOILER IS ONLY 2 YEARS OLD & BAXI HAVENT A CLUE
-
13th December 2006, 11:20 PM
#2
Moderator
Re: BAXI PROBLEM NO CH BUT HAVE WATER
i take it you've turned all the stats up,
is it a new boiler put on an old system?
i think on that boiler there is a diver valve to the left hand side(inside the case) i think its got a black cover on it,
i'd turn all the valves off on the boiler
open the pressure release valve to drain it
take out the diver valve ( watch out theres still plenty of water about) and give it a clean
its more than likely stuck in the hot water position.
-
14th December 2006, 08:30 PM
#3
Automated Home Lurker
Re: BAXI PROBLEM NO CH BUT HAVE WATER
Hi
its a new boiler only 2 years old.
all off a sudden last night the central heating started working, but the rads are not getting very warm. just warmish. the pressure is near the 3.
im totally confussed.
so i take it that its not the diverter as now the ch is working but not to full potential.??
any ideas ????
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules