Results 1 to 3 of 3

Thread: Simple stuff but no manual - Worcester 28i Greenstar

  1. #1
    Automated Home Lurker
    Join Date
    Dec 2006
    Posts
    4

    Default Simple stuff but no manual - Worcester 28i Greenstar

    Hi All (and a Merry Christmas!)

    Trying to fit the remote control timer to the front of our newish greenstar 28i Junior but cannot get the boiler's main metal cover off (the flap was easy!). I found the two screws at the top but the ones at the bottom are alluding me. I'd be OK if there was a downloadable fitting instructions or instructions with the remote but I guess us mere mortals are not allowed to see such things! Can anyone advise (or point me at the instructions)?

    Many thanks

    Region2

  2. #2
    Automated Home Lurker
    Join Date
    Dec 2006
    Posts
    4

    Default Re: Simple stuff but no manual - Worcester 28i Greenstar

    Solved!

    By careful examination with a mirror I found two screws at the bottom as shown here:


    So I can now control my boiler remotely (good news as it's awkward to get at in the utility room) - here's the remote control:


    Any tips or experience on using it are welcomed!!!
    My next question is a bit more technical - I guess I need to disconnect the existing wired in thermostat - if so, how? :?:

    And finally - anyone want to buy an MT 10 Mechanical Timer? They're compatible with Worcester Cdi, Si and I Juniors apparently! And dead easy to fit once you work out how to get the front off! ops:


    Thanks (and a happy New Year!!!)

    Region2

  3. #3
    Automated Home Jr Member
    Join Date
    Dec 2006
    Posts
    14

    Default

    Hi Region2, follow this link for a pdf of how to fit ur mt10rf.....
    http://www.worcester-bosch.co.uk/ind...8&from_id=5029
    Good Luck & Happy New Year!
    Steve

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •