Hi Eveyone, I have a problem with my Worcester 240 Combi RSF Boiler.
The pressure gauge on the front of the control Panel reads "0" when the system is not running.
When the system is switched on the Pressure gauge creeps up after about
30 mins it reads 1.5 bar and sits there quite happy.
The system will then switch off and the gauge will then drop back to "0"
as the water cools in the system.
Heating and Hot water seems fine, I have only recently moved in and have
no information or user guide.
Any help would be very much appreciated.
Many Thanks
The pressure gauge on the front of the control Panel reads "0" when the system is not running.
When the system is switched on the Pressure gauge creeps up after about
30 mins it reads 1.5 bar and sits there quite happy.
The system will then switch off and the gauge will then drop back to "0"
as the water cools in the system.
Heating and Hot water seems fine, I have only recently moved in and have
no information or user guide.
Any help would be very much appreciated.
Many Thanks
Comment