Hi,
I bought an SC9000 security alarm system, a Digimax 210 thermostat, and an UM7206 universal module (plus other stuff) a while ago.
I finally got the SC9000 fitted, no problem at all, very good. Arms, disarms, triggers, switches lights, and calls/answers correctly. The SC9000 is on A1.
Yesterday I got the UM7206 fitted to my combi boiler too. Again, no problem at all. I can switch heating on/off with my remote. (This thing is much louder than I expected by the way.)
Today I digged out the Digimax 210, gave it some batteries, and registered it to my SC9000 in zone 1. I then set my UM7206 to address B3.
So I disarmed the alarm, and waited and waited and... but the Digimax does not trigger the UM7206 on or off
Also tried setting the UM7206 to B4, but still the sames. By the way the Marmitek manual is so confusing, it says it will trigger the next house code of the alarm, and the unit code will be alarm unit code + 3. Yet it provides an example saying if alarm is on A1, it triggers B3?! As far as I know 1+3 is not 3...
Also tried registering the Digimax on zone 3, and setting the UM7206 to B5 and lateron B6, still no go.
I then found out that SC9000 produced before 05D18 is not compatible with the Digimax 210. But I made sure mine is produced later than that - mine is 05F25.
So why doesn't it work?
Help please!
Thanks.
I bought an SC9000 security alarm system, a Digimax 210 thermostat, and an UM7206 universal module (plus other stuff) a while ago.
I finally got the SC9000 fitted, no problem at all, very good. Arms, disarms, triggers, switches lights, and calls/answers correctly. The SC9000 is on A1.
Yesterday I got the UM7206 fitted to my combi boiler too. Again, no problem at all. I can switch heating on/off with my remote. (This thing is much louder than I expected by the way.)
Today I digged out the Digimax 210, gave it some batteries, and registered it to my SC9000 in zone 1. I then set my UM7206 to address B3.
So I disarmed the alarm, and waited and waited and... but the Digimax does not trigger the UM7206 on or off
Also tried setting the UM7206 to B4, but still the sames. By the way the Marmitek manual is so confusing, it says it will trigger the next house code of the alarm, and the unit code will be alarm unit code + 3. Yet it provides an example saying if alarm is on A1, it triggers B3?! As far as I know 1+3 is not 3...
Also tried registering the Digimax on zone 3, and setting the UM7206 to B5 and lateron B6, still no go.
I then found out that SC9000 produced before 05D18 is not compatible with the Digimax 210. But I made sure mine is produced later than that - mine is 05F25.
So why doesn't it work?
Help please!
Thanks.
Comment