Heating Conrtol using X10

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • Rocketron204
    Automated Home Jr Member
    • Feb 2007
    • 11

    Heating Conrtol using X10

    Is it possible to "read" the temperature or get a signal from a Digimax 210 thermostat into a home automation program?
    I don't want to use a RCS TXB16 X10 Bi-Directional Thermostat as they are too expensive.

    Would it be possible to use a Digimax 210 Thermostat and software (harmony or something similar) to control the heating.
    I don't want to use a Sc2800 or similar, I don't want the expense if I can use a program and it should be more flexible

    I can program so if the software and digimax allows it it shouldn't be a problem
  • toscal
    Moderator
    • Oct 2005
    • 2061

    #2
    Just posted in the X10 forum.
    IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.
    Renovation Spain Blog

    Comment

    Working...
    X