Is it possible to "read" the temperature or get a signal from a Digimax 210 thermostat into a home automation program?
I don't want to use a RCS TXB16 X10 Bi-Directional Thermostat as they are too expensive.
Would it be possible to use a Digimax 210 Thermostat and software (harmony or something similar) to control the heating.
I don't want to use a Sc2800 or similar, I don't want the expense if I can use a program and it should be more flexible
I can program so if the software and digimax allows it it shouldn't be a problem
I have also posted this on the heating forum
I don't want to use a RCS TXB16 X10 Bi-Directional Thermostat as they are too expensive.
Would it be possible to use a Digimax 210 Thermostat and software (harmony or something similar) to control the heating.
I don't want to use a Sc2800 or similar, I don't want the expense if I can use a program and it should be more flexible
I can program so if the software and digimax allows it it shouldn't be a problem
I have also posted this on the heating forum
Comment