For SALE: X10 LD11 and AD10 din rail units

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • SiliconPixel
    Automated Home Sr Member
    • May 2007
    • 52

    For SALE: X10 LD11 and AD10 din rail units

    For sale, used din rail units. Excellent condition all working. Re-wire means I now have these for sale.

    LD11 din rail X10 dimmer units
    AD10 din rail X10 appliance units (on/off)

    Bargain at only £10 + P+P each unit. P+P at cost.


    Specs:

    AD10:
    Supply voltage: 230V +10%/-15% 50Hz
    Supply current: =< 20mA capacitive
    Making capacity: 2KW (incandescent lamp)
    3A (motors)
    16A (resistive loads)
    EMC emission: According to EN50081-1
    EMC immunity: According to EN50082-1
    Electrical safety: According to EN60950 and EN60065
    Signal sensitivity: 15mVpp min 50mVpp max at 120KHz
    Input impedance: => 180Ohms (L-N) at 120KHz
    Connections: Screw type terminals for phase, neutral,
    switched phase, control 1 and 2
    Ambient temperature: -10ºC to +40ºC (operation)
    -20ºC to +70ºC (storage)
    Dimensions: Length 88, Width 35, Height 65 mm

    LD11:
    Supply voltage: 230V +10%/-15% 50Hz
    Supply current: =< 20mA capacitive
    Making capacity: 60W to 700W (incandescent lamps only)
    Regulating time: 3.5s +- 0.2s from full On to Off
    EMC emission: According to EN50081-1
    EMC immunity: According to EN50082-1
    Electrical safety: According to EN60950 and EN60065
    Signal sensitivity: 15mVpp min 50mVpp max at 120KHz
    Input impedance: => 60 Ohms (L-N) at 120KHz
    Fuse: 2.5A(T)
    Connections: Screw type terminals for phase, neutral,
    switched phase, control 2
    Ambient temperature: -10C to +50C (operation)
    -20C to +70C (storage)
    Dimensions: Length 50, Width 80, Height 65 mm
  • dazzlevw
    Automated Home Jr Member
    • Sep 2006
    • 24

    #2
    Hi Silicon Pixel,

    How many of each unit do you have available?

    Cheers

    Daz
    -----------------------------
    www.darrenwright.me.uk
    www.gbpvr.com
    www.slimdevices.com

    Comment

    • SiliconPixel
      Automated Home Sr Member
      • May 2007
      • 52

      #3
      Hi approx 34 LD11's and 4ish AD10's - need to confirm though as they're scattered around the house ATM.

      Hope that helps?

      Cheers,

      Paul.

      Comment

      • dazzlevw
        Automated Home Jr Member
        • Sep 2006
        • 24

        #4
        Hi, can I take 4 LD11's and two AD10's of your hands?

        if you can let me know the total including postage, can i pay you via paypal or is there another method you prefer?

        Many Thanks

        daz
        -----------------------------
        www.darrenwright.me.uk
        www.gbpvr.com
        www.slimdevices.com

        Comment

        • SiliconPixel
          Automated Home Sr Member
          • May 2007
          • 52

          #5
          Sure no problem - will work out postage shortly - any preferences?

          Send me your email and I'll send you the details.

          I prefer bank transfer if possible.

          Thanks,

          Paul.

          Comment

          • SiliconPixel
            Automated Home Sr Member
            • May 2007
            • 52

            #6
            Hi,

            P+P and Special Delivery would be £8 for next day after payment cleared.

            Let me know if you want to go ahead.

            Cheers,

            Paul.

            Comment

            • dazzlevw
              Automated Home Jr Member
              • Sep 2006
              • 24

              #7
              Paul,
              Sorry for the delay, crazy day got right in the way yesterday!. That sounds fine, I'll send you a PM with my email. Bank transfer is fine.

              Thanks

              Daz
              -----------------------------
              www.darrenwright.me.uk
              www.gbpvr.com
              www.slimdevices.com

              Comment

              Working...
              X