For sale, used din rail units. Excellent condition all working. Re-wire means I now have these for sale.
LD11 din rail X10 dimmer units
AD10 din rail X10 appliance units (on/off)
Bargain at only £10 + P+P each unit. P+P at cost.
Specs:
AD10:
Supply voltage: 230V +10%/-15% 50Hz
Supply current: =< 20mA capacitive
Making capacity: 2KW (incandescent lamp)
3A (motors)
16A (resistive loads)
EMC emission: According to EN50081-1
EMC immunity: According to EN50082-1
Electrical safety: According to EN60950 and EN60065
Signal sensitivity: 15mVpp min 50mVpp max at 120KHz
Input impedance: => 180Ohms (L-N) at 120KHz
Connections: Screw type terminals for phase, neutral,
switched phase, control 1 and 2
Ambient temperature: -10ºC to +40ºC (operation)
-20ºC to +70ºC (storage)
Dimensions: Length 88, Width 35, Height 65 mm
LD11:
Supply voltage: 230V +10%/-15% 50Hz
Supply current: =< 20mA capacitive
Making capacity: 60W to 700W (incandescent lamps only)
Regulating time: 3.5s +- 0.2s from full On to Off
EMC emission: According to EN50081-1
EMC immunity: According to EN50082-1
Electrical safety: According to EN60950 and EN60065
Signal sensitivity: 15mVpp min 50mVpp max at 120KHz
Input impedance: => 60 Ohms (L-N) at 120KHz
Fuse: 2.5A(T)
Connections: Screw type terminals for phase, neutral,
switched phase, control 2
Ambient temperature: -10C to +50C (operation)
-20C to +70C (storage)
Dimensions: Length 50, Width 80, Height 65 mm
LD11 din rail X10 dimmer units
AD10 din rail X10 appliance units (on/off)
Bargain at only £10 + P+P each unit. P+P at cost.
Specs:
AD10:
Supply voltage: 230V +10%/-15% 50Hz
Supply current: =< 20mA capacitive
Making capacity: 2KW (incandescent lamp)
3A (motors)
16A (resistive loads)
EMC emission: According to EN50081-1
EMC immunity: According to EN50082-1
Electrical safety: According to EN60950 and EN60065
Signal sensitivity: 15mVpp min 50mVpp max at 120KHz
Input impedance: => 180Ohms (L-N) at 120KHz
Connections: Screw type terminals for phase, neutral,
switched phase, control 1 and 2
Ambient temperature: -10ºC to +40ºC (operation)
-20ºC to +70ºC (storage)
Dimensions: Length 88, Width 35, Height 65 mm
LD11:
Supply voltage: 230V +10%/-15% 50Hz
Supply current: =< 20mA capacitive
Making capacity: 60W to 700W (incandescent lamps only)
Regulating time: 3.5s +- 0.2s from full On to Off
EMC emission: According to EN50081-1
EMC immunity: According to EN50082-1
Electrical safety: According to EN60950 and EN60065
Signal sensitivity: 15mVpp min 50mVpp max at 120KHz
Input impedance: => 60 Ohms (L-N) at 120KHz
Fuse: 2.5A(T)
Connections: Screw type terminals for phase, neutral,
switched phase, control 2
Ambient temperature: -10C to +50C (operation)
-20C to +70C (storage)
Dimensions: Length 50, Width 80, Height 65 mm
Comment