For SALE: X10 LD11 and AD10 din rail units

[SiliconPixel]

For sale, used din rail units. Excellent condition all working. Re-wire means I now have these for sale.

LD11 din rail X10 dimmer units
AD10 din rail X10 appliance units (on/off)

Bargain at only £10 + P+P each unit. P+P at cost.


Specs:

AD10:
Supply voltage: 230V +10%/-15% 50Hz
Supply current: =< 20mA capacitive
Making capacity: 2KW (incandescent lamp)
3A (motors)
16A (resistive loads)
EMC emission: According to EN50081-1
EMC immunity: According to EN50082-1
Electrical safety: According to EN60950 and EN60065
Signal sensitivity: 15mVpp min 50mVpp max at 120KHz
Input impedance: => 180Ohms (L-N) at 120KHz
Connections: Screw type terminals for phase, neutral,
switched phase, control 1 and 2
Ambient temperature: -10ºC to +40ºC (operation)
-20ºC to +70ºC (storage)
Dimensions: Length 88, Width 35, Height 65 mm

LD11:
Supply voltage: 230V +10%/-15% 50Hz
Supply current: =< 20mA capacitive
Making capacity: 60W to 700W (incandescent lamps only)
Regulating time: 3.5s +- 0.2s from full On to Off
EMC emission: According to EN50081-1
EMC immunity: According to EN50082-1
Electrical safety: According to EN60950 and EN60065
Signal sensitivity: 15mVpp min 50mVpp max at 120KHz
Input impedance: => 60 Ohms (L-N) at 120KHz
Fuse: 2.5A(T)
Connections: Screw type terminals for phase, neutral,
switched phase, control 2
Ambient temperature: -10C to +50C (operation)
-20C to +70C (storage)
Dimensions: Length 50, Width 80, Height 65 mm

[dazzlevw]

Hi Silicon Pixel,

How many of each unit do you have available?

Cheers

Daz

[SiliconPixel]

Hi approx 34 LD11's and 4ish AD10's - need to confirm though as they're scattered around the house ATM.

Hope that helps?

Cheers,

Paul.

[dazzlevw]

Hi, can I take 4 LD11's and two AD10's of your hands?

if you can let me know the total including postage, can i pay you via paypal or is there another method you prefer?

Many Thanks

daz

[SiliconPixel]

Sure no problem - will work out postage shortly - any preferences?

Send me your email and I'll send you the details.

I prefer bank transfer if possible.

Thanks,

Paul.

[SiliconPixel]

Hi,

P+P and Special Delivery would be £8 for next day after payment cleared.

Let me know if you want to go ahead.

Cheers,

Paul.

[dazzlevw]

Paul,
Sorry for the delay, crazy day got right in the way yesterday!. That sounds fine, I'll send you a PM with my email. Bank transfer is fine.

Thanks

Daz