We are in the process of re-writing the manual we use with our Home protector consoles. These consoles are similar to the SC9000 but basically in a different box.
And there is a section on the Digimax thermostats.
So I thought that as a few of you have been having problems with getting these to work that I would post here what we have found during the re-writing process.
What the console manual says is that if the console is on A then the first digimax transmits on B13 so the second would transmit on B14. And if you look in the DIGIMAX manual it states that its B1 for the first thermostat and B2 for the second etc. So we are wondering if there is a typo in one of the manuals.
When we have time we will check what is correct, and post our finding here. Can any one else confirm if its either B1 or B13 if the console is on house code A.
Just thought this might be useful to report this now and possibly save some head scratching during the install.
And there is a section on the Digimax thermostats.
So I thought that as a few of you have been having problems with getting these to work that I would post here what we have found during the re-writing process.
What the console manual says is that if the console is on A then the first digimax transmits on B13 so the second would transmit on B14. And if you look in the DIGIMAX manual it states that its B1 for the first thermostat and B2 for the second etc. So we are wondering if there is a typo in one of the manuals.
When we have time we will check what is correct, and post our finding here. Can any one else confirm if its either B1 or B13 if the console is on house code A.
Just thought this might be useful to report this now and possibly save some head scratching during the install.
Comment