Results 1 to 2 of 2

Thread: Outside PIR - Different case

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Automated Home Lurker
    Join Date
    Mar 2007
    Posts
    3

    Default Outside PIR - Different case

    All,

    I wonder if anybody out there has changed the case of the CBUS outside PIR. It is not really very attractive and I wonder if anyone has fitted this inside another fitting - brushed steel for example??

    Any thoughts or ideas where I can buy something to swap this would be great.

    Thanks in advance

    Dowelly

  2. #2
    Automated Home Jr Member CableTie's Avatar
    Join Date
    Jan 2005
    Location
    South Lakes
    Posts
    35

    Default

    The ugly bit in my opinion is the mounting, I think you would struggle to do anything with it.

    The knuckles are a problem to hide and they give it the flexibility to set it up so well. I guess if you knew the exact angles that you have it set at you could get a good local metal work shop to make something that allowed you to ditch everything bar the sensor which would improve it.

    Or perhaps you could buy one of the cheap PIR's that are about and swap the sensor internals over but it would be very costly if it goes wrong.

    I think I would opt for something stainless to mount the sensor assembly on.

    Take a look here

    http://www.cbusforums.com/forums/sho...&highlight=pir
    Last edited by CableTie; 18th September 2007 at 09:01 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •