Can anyone help with my problem
The AWM2 is wired with both the signal wires connected together (i.e. so that one switch operates F1 and F2) two lights come on together but can be independently switched on and off via my pronto remote.
This worked OK for a while but first the second X10 (F2)address stopped working from the switch and now F1 has stopped working from the switch, however I can hear the module relay coming on (power wise the module is not connected to anything).
Both F1 and F2 switch from my pronto via RF so I know the light modules are OK.
Have I damaged the module by connecting the signal wires together
Thanks in advance
Ron
The AWM2 is wired with both the signal wires connected together (i.e. so that one switch operates F1 and F2) two lights come on together but can be independently switched on and off via my pronto remote.
This worked OK for a while but first the second X10 (F2)address stopped working from the switch and now F1 has stopped working from the switch, however I can hear the module relay coming on (power wise the module is not connected to anything).
Both F1 and F2 switch from my pronto via RF so I know the light modules are OK.
Have I damaged the module by connecting the signal wires together
Thanks in advance
Ron
Comment