Results 1 to 2 of 2

Thread: How can we integrate C-bus to HAI systems?

  1. #1
    Automated Home Lurker 2sc's Avatar
    Join Date
    Oct 2007
    Posts
    8

    Default How can we integrate C-bus to HAI systems?

    A client that prefer C-Bus for the lighting control asked me if C-bus can be integrated to HAI. On the C-Bus Enabled Partners list I saw HAI, but I can't find any clue how to achieve this. I tried on the internet too but I can't find anything.

    Does any of you made a similar installation?

  2. #2
    Automated Home Guru FrankMcAlinden's Avatar
    Join Date
    Feb 2004
    Location
    Melbourne Australia
    Posts
    109

    Default

    Hi 2sc

    You would need to speak to HAI to see if they have CBUS Enabled their Panels...
    This usually means using a serial board on the HAI panel talking to a Clipsal PCI (pc interface).....

    If a serial interface isnt available from HAI then maybe you could use some relay outputs on the HAI connected to some Clipsal 4 channel bus couplers..This would allow you to control CBUS from the HAI panel.....

    HTH
    Frank
    Home of FirM - the Multi Zone IR Transport System
    http://www.armaghelectrical.com.au/index.html

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •