How can we integrate C-bus to HAI systems?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • 2sc
    Automated Home Lurker
    • Oct 2007
    • 8

    How can we integrate C-bus to HAI systems?

    A client that prefer C-Bus for the lighting control asked me if C-bus can be integrated to HAI. On the C-Bus Enabled Partners list I saw HAI, but I can't find any clue how to achieve this. I tried on the internet too but I can't find anything.

    Does any of you made a similar installation?
  • FrankMcAlinden
    Automated Home Guru
    • Feb 2004
    • 109

    #2
    Hi 2sc

    You would need to speak to HAI to see if they have CBUS Enabled their Panels...
    This usually means using a serial board on the HAI panel talking to a Clipsal PCI (pc interface).....

    If a serial interface isnt available from HAI then maybe you could use some relay outputs on the HAI connected to some Clipsal 4 channel bus couplers..This would allow you to control CBUS from the HAI panel.....

    HTH
    Frank
    Home of FirM - the Multi Zone IR Transport System
    http://www.armaghelectrical.com.au/index.html

    Comment

    Working...
    X