Does anyone know of anyone who has parts, repair, or support for Unity Systems Home Manager?
Unity Systems Home Manager
Collapse
X
-
Re: Unity Systems Home Manager
Try Mike Fritts
mikefritts@prodigy.net
If you have problems getting touch, please email me at
vendor@randyray.com
-
-
Re: Unity Systems Home Manager
Originally posted by smarthomDoes anyone know of anyone who has parts, repair, or support for Unity Systems Home Manager?
Comment
-
-
Re: Unity Systems Home Manager
Unity Home Manager repair:
Mike Fritts
HM Automation Systems
1364 S. Spur
Mesa, AZ 85204
480.813.2656
One of the techs that worked for Unity is in AZ with Mike. Mike bought all remaining inventory, and will repair Home Managers and UCs at a reasonable price.
Note: there are no temperature switch boards available anywhere, unless you've removed a HM after system replacement.
Gene Jordan in the San Francisco bay area, www.unitysystemshomemanager.com.
Uses Crestron to replace all but the zone heating/cooling, and has programmed an interface to the HM. Pricey, but good.
Comment
-
-
Re: Unity Systems Home Manager
Mike Fritz of HM Automation is a great resource. I also have been supporting Home Managers for almost 20 years and have many boards available. Harvey LaForge
Comment
-
-
Re: Unity Systems Home Manager / Service, Repairs & Upgr
Unity's Home Manager / Service, Repairs, Upgrades & Replacement
20 + years experience w/ HM installation, service & CRT repairs
Mike McDugald / GM
info@eHomeControl.com
Los Angeles, CA USA
310-621-8665 mbl
310-444-9575 vm
Comment
-
-
Re: Unity Systems Home Manager
Originally posted by 1jtHas anyone come up with a direct replacement for Unity that is capable of using the existing in wall sensors, dampers etc....
Comment
-
-
Re: Unity Systems Home Manager
By the way, does anyone have the Home Manager files that let you work on the system from your PC?
The files came on a floppy drive and are titled:
HMCRT.EXE
HMCRT.INI
If anyone has those files, I would really appreciate it if you could email them to me at: jtpaladin@yahoo.com.
Thank you.
Comment
-
-
Originally posted by 1jtI perfer not to use this company. Have had a bad experience with them.
Also, do you have the files I asked about? I could really use them. Thanks.
I spoke with Mike at ehomecontrol and I had a great conversation with him. He might very well be able to replace the existing Home Manger sensors with the Omni equipment. I recommend giving him a call.
Comment
-
Comment