Zone control seems to be something of a hot topic here at the moment!
I did have a read through some of the other ZC topics i found here, but i am still not entirely sure how it works, and the manufacturer's documentation isn't much more help.
Anyway, here is what i want to do:
I am making 2 self-contained flats (non-commercial) which i want to run off one boiler.
Each flat has 3 rooms which require heating. 1 radiator in each room.
I am looking at using (i believe this is correct) Honeywell HR80 radiator valves and CM67z Zone Control.
Now, from what i understand about "zones", i can choose two different settings per CM67z. Right? This would mean that for flat 1, i could have two schedules - maybe one for the lounge and one for the bedroom/bathroom. Is this correct? Or would i be able to set more than 2 schedules? i.e. seperate schedules for each of the 3 rooms?
As i understand it so far, i would need 6 HR80s and 2 CM67zs. 3 valves for each flat and 1 controller for each.
If someone could clear up these points and add any other relevant advice i'd appreciate it. I don't want to spend hundreds of quid on equipment and then discover i've bought too little / too much / the wrong things.
Thanks.
I did have a read through some of the other ZC topics i found here, but i am still not entirely sure how it works, and the manufacturer's documentation isn't much more help.
Anyway, here is what i want to do:
I am making 2 self-contained flats (non-commercial) which i want to run off one boiler.
Each flat has 3 rooms which require heating. 1 radiator in each room.
I am looking at using (i believe this is correct) Honeywell HR80 radiator valves and CM67z Zone Control.
Now, from what i understand about "zones", i can choose two different settings per CM67z. Right? This would mean that for flat 1, i could have two schedules - maybe one for the lounge and one for the bedroom/bathroom. Is this correct? Or would i be able to set more than 2 schedules? i.e. seperate schedules for each of the 3 rooms?
As i understand it so far, i would need 6 HR80s and 2 CM67zs. 3 valves for each flat and 1 controller for each.
If someone could clear up these points and add any other relevant advice i'd appreciate it. I don't want to spend hundreds of quid on equipment and then discover i've bought too little / too much / the wrong things.
Thanks.
Comment