Originally Posted by
Wexfordman
Hi Frank,
Thanks for the reply. With regards to getting CAT 5 to my switches, it should be easy enough, my house is a bungalow, so I will have access to the trunking from the attic down to each switch.
If I go ahead with it, the cbus, hw will go to the same point as the x10 din modules, or I could gradually "migrate" then to a new consumer unit positioned next to them. Just need to work out space and no of units etc.
So I take it the wiring of the AC side will be straight forward enough, in that I pull ot the live going to the switch, and connect load from the X10 din module, to the load of my cbus module ?
I have 18 din modules which would be replaced, so this might be pricey, hence the staged approach. Also, I will probabvly need to upgrade comfort as well, as I have a gen 1 panel. Have a Homevision unit too, so not sure how well that will integrate, or if its even worth keeping ?
Regards,
Eamon