Results 1 to 3 of 3

Thread: Question regarding x10 and domia10 and domia lite

  1. #1
    Automated Home Lurker
    Join Date
    Apr 2008
    Posts
    2

    Default Question regarding x10 and domia10 and domia lite

    Hi all heres my situation. Recently purchased myself a an X10 TM13 transceiver,along with a AW12 appliance module and a Keyfob to go with it. I wired the aw12 into my bathroom lights and it works a treat apart from a slight second delay when i turn the lights on with the fob remote,though i expected this. My main problem is im totally sold on this stuff and have decided to wire all/most of my lights incorporating pir's to switch lights when i walk into the room. Doing a bit more research i noticed that there is new x10 hardware out going by the name of X10 2 (aka) domia10 and domia lite i know that domia10 and x10 are compatible and that X10 and domia lite is not.So this may seem a stupid question! If i purchase the new and improved domia pir's and micro modules for the rest of my lights and replace my existing AW12 will they work with my X10 TM13 transeiver? or will i have to purchase a domia10 transeiver?

    Much appreciated and sorry if question drags a bit.

  2. #2
    Moderator toscal's Avatar
    Join Date
    Oct 2005
    Location
    Near Alicante Spain
    Posts
    2,036

    Default

    As Domia10 is X10 compatible then the TM13 should still work.

  3. #3
    Automated Home Lurker
    Join Date
    Apr 2008
    Posts
    2

    Default

    Cheers Toscal
    Ill purchase some domia appliance modules and post the results

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •