If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Both transmit and receive X10 signals.
The input/output port of the CM11 is based on RS232 communication. The XM10 contains a logics port for TTL or CMOS connections. This means the timing and protocol settings for the XM10 are completely determined by the control unit.
Such control would be the Homevision unit www.csi3.com.
IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM. Renovation Spain Blog
Comment