SC9000 sensor problem

[BritKat]

Hi there guys,
Just a quick question about the SC9000 security panel. I bought a secondhand one of these the other day and also got some of the MS10A motion sensors. However I can't seem to register the sensors with the system. I have tried all the things I can think of including clearing all zones and sensors.
I set the SC9000 to install zone
Press the test button on MS10A
but hear no beep or confirmation from the SC9000.
I have reset the code on the MS10A a few times but it never seems to make a difference.

Any help appreciated.

[toscal]

The SC9000 is a European x10 based security panel and the MS10A is a US spec motion detector. So they operate on completely different frequencies.
Europe normally uses 433.92MHz or 868 MHz and the US uses 315 MHz .
The Sc9000 uses 433.92MHz and your MS10A uses 315MHz

[BritKat]

Darn it!
Guess I'll have to ebay the MS10A's and get hold of some UK ones. Whats the part no. for the UK ones?

Mark

[toscal]

They are MS90 or MS18E.
How many do you need.

[BritKat]

I probably want 2 or 3.

[theautomationstore]

Check these out for X10 and X10 Security.

http://www.theautomationstore.co.uk/...ty/cat_46.html