Hi,
I've noticed (after everything working as expected) that Cortex is now ignoring the light level when deciding to operate a light. I have the following setup (mostly defaults).
Light connections :
Room presence = "Lounge - presence state output"
Inside light level = "Lounge LightLevel"
Lounge LightLevel :
Dark Threshold = 50%
Current reading = 56% (ie. it's not dark)
Lounge is occupied and presence reported correctly.
In light behaviour :
Operation mode = "when someone is present and its dark, or light timer"
Automatic light timer :
Duration = 00:10:00
Elapsed time = 01:08:10
Condition states required to turn light on =
level - *ignored*
and
( presence = true
or
timer = false )
So from the above, why is Cortex ignoring the measured lounge light level ? As I said, all this was working ok before - anyone have any idea what's going on ?
Thanks,
Simon
PS. I have attached a zipped screenshot of the above
I've noticed (after everything working as expected) that Cortex is now ignoring the light level when deciding to operate a light. I have the following setup (mostly defaults).
Light connections :
Room presence = "Lounge - presence state output"
Inside light level = "Lounge LightLevel"
Lounge LightLevel :
Dark Threshold = 50%
Current reading = 56% (ie. it's not dark)
Lounge is occupied and presence reported correctly.
In light behaviour :
Operation mode = "when someone is present and its dark, or light timer"
Automatic light timer :
Duration = 00:10:00
Elapsed time = 01:08:10
Condition states required to turn light on =
level - *ignored*
and
( presence = true
or
timer = false )
So from the above, why is Cortex ignoring the measured lounge light level ? As I said, all this was working ok before - anyone have any idea what's going on ?
Thanks,
Simon
PS. I have attached a zipped screenshot of the above
Comment