I am planning to install Idranet for my UFH temperature control and security but I also would like to automate my home theater stuff. The question is how to wisely use idratek for up or down control. I have both 230V AC for the motorized screen and 12v DC for the projector lift. The motorized screen has a sycronous motor and is wired by 4 (neutral, earth and 2 live for up and down). The projector lift is a linear actuator with 2 wires (up and down controlled by reversing current). I could use 2 relay for each but I thought to challenge the forum for a wiser and safer approach. Any suggestions of a digital relay that could reverse current for the 12v and apply to different live on 230v and the choice could be controlled by pulse from idratek? GOsh.... even I am confused with my thoughts.
Carlos
Carlos
Comment