If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
What do you want to do. If its dim or bright to a certain level then this is possible with normal plug in modules. You just have to remember not to switch it off but dim to 0. Dimming to zero is not quite the same as off, but near enough. The light it is controlling will appear off. But the module is effectively still active so it will consume slightly more than if you sent the off command.
Have a look at the http://x10-hk.com/store/product_info...products_id=44
If its not an urgent requirement, then you may want to wait a bit. There will be some new X10 modules coming to the market within the next six to eight months, and there maybe some new plug in types in this line up. I can't say too much more other than someday all X10 modules will be made this way.
IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM. Renovation Spain Blog
Comment