Hi there. Well we have finally got the prototypes up and running. They are a bit rough around the edges, but they are prototypes.
These are new X10 modules. In the initial range there will be an Appliance , Lighting, CFL, and a high power version of the lighting module.
All modules have built in noise filtering. Can be checked for status. And rather than a user replaceable fuse they will have small circuit breakers built in. So no putting the wrong fuse in.
We are also looking into maybe having a signal that will be sent when the circuit breaker pops, but its pretty tight in the box. So this may be on the back burner for a while.
The enclosure is of the din rail type so will fit into any standard din rail consumer unit.
The units will be tested for about a month then we hope once the kinks have been ironed out (if any) to go through the CE marking process. Then start with a small scale production before ramping up to a large production.
Price will be somewhere between 45 to 60 euros.
These are new X10 modules. In the initial range there will be an Appliance , Lighting, CFL, and a high power version of the lighting module.
All modules have built in noise filtering. Can be checked for status. And rather than a user replaceable fuse they will have small circuit breakers built in. So no putting the wrong fuse in.
We are also looking into maybe having a signal that will be sent when the circuit breaker pops, but its pretty tight in the box. So this may be on the back burner for a while.
The enclosure is of the din rail type so will fit into any standard din rail consumer unit.
The units will be tested for about a month then we hope once the kinks have been ironed out (if any) to go through the CE marking process. Then start with a small scale production before ramping up to a large production.
Price will be somewhere between 45 to 60 euros.
Comment