We are about to start our electrical installation work in earnest and have even registered with building control for them to carry out the inspection! So far all they have sent me is a load of "general" info about when to inspect for a normal build process. Looks like they are still not properly geared up for people doing electrics. That is an aside though.
We are starting on the Kitchen which is being moved to a new location in the house. I plan to put a DFP002 next to the Kitchen door. Under part M all electrical fittings should be below 1200mm which seems ever so low. Has anyone mounted a DFP this low and is it usable? Seems like we will forever be bending over!
Our cottage is also quite old so I am having trouble getting the Idratek wall switches approved in some room for SWMBO. She wants "period" light switches in some key locations. I am assuming I could use a normal mains light switch in whatever style but feed the inputs into a digital input to sense when the light switch is flicked on/off??
Thanks
Allan
We are starting on the Kitchen which is being moved to a new location in the house. I plan to put a DFP002 next to the Kitchen door. Under part M all electrical fittings should be below 1200mm which seems ever so low. Has anyone mounted a DFP this low and is it usable? Seems like we will forever be bending over!
Our cottage is also quite old so I am having trouble getting the Idratek wall switches approved in some room for SWMBO. She wants "period" light switches in some key locations. I am assuming I could use a normal mains light switch in whatever style but feed the inputs into a digital input to sense when the light switch is flicked on/off??
Thanks
Allan
Comment