Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Finding a C-Bus expert - Herts

  1. #1
    Automated Home Lurker
    Join Date
    Apr 2010
    Posts
    1

    Default Finding a C-Bus expert - Herts

    Hi

    I have had a look on the installer pages but have not found anyone suitable who can answer my questions - any suggestions?

    I am in a house in Herts (between Potters Bar and Hertford) which has a working C-Bus system. However I would like to expand it to allow for more functionality and (if possible) use the installed Cat 5 cabling for a home network.

    Please reply if anyone has ideas who can help.

    Thanks.

  2. #2
    Automated Home Legend TimH's Avatar
    Join Date
    Feb 2004
    Location
    UK
    Posts
    503

    Post

    You have PM

    Tim.

  3. #3
    Automated Home Lurker
    Join Date
    Apr 2008
    Posts
    5

    Default

    I use this guy

    http://www.benaddison.com/

    Comes done from up North and knows cbus very well. Did all of the install on my house and we are talking about 40+ lighting zones.

    Ben

  4. #4

    Default Cbus Dealer

    Hi

    We are a Cbus certified dealer based in Dorset, We specialize in Cbus and have fully trained engineers if required to program the systems for you. We also can offer all equipment needed to your requirements with full discount applied if you meet the requirements. Please get in contact if you wish to discuss further

    luke@smarthomesupplies.com

    01202 735403

    Regards

    Luke
    Branch Manager

  5. #5
    Automated Home Lurker
    Join Date
    Mar 2011
    Location
    Cambridge, Bishops Stortford
    Posts
    3

    Default

    You could contact our Bishop's Stortford branch on 01279 506576
    www.audiofile.co.uk | Home Automation | Home Cinema | Premium Hifi
    Branches in Cambridge and Bishop Stortford

  6. #6
    Automated Home Lurker
    Join Date
    Jan 2004
    Posts
    2

    Default Household Automation Ltd

    We have been installing and maintaining CBUS installations for over a decade now. We would be pleased to offer any help or advice on your current CBUS system.

    Please feel free to reply to this post and I will give you a call.

    Andy Ellis
    Household Automation Ltd

  7. #7
    Automated Home Jr Member
    Join Date
    Nov 2011
    Location
    Sydney, Australia
    Posts
    14

    Default

    Hi Guys,

    Our new website is active and we have over 350 Clipsal C-Bus brochures, data sheets and manuals online to help you onsite. We also have 600 nice Home Automation, Home Theatre and Energy Efficiency products up to give you some ideas for your home or client's site. A great resource for the DIY Automated Home builder.

    We enjoy visitors and hope you find our new site helpful. We are Nous House based in the land of C-Bus, Sydney Australia.

    All the best,

    Blacky7
    Nous House - Smart Home... Smart Owner!

    http://www.noushouse.com.au/

  8. #8
    Automated Home Jr Member
    Join Date
    Nov 2011
    Location
    Sydney, Australia
    Posts
    14

    Default

    Also forgot to mention, if you haven't found it already, try going to CBus Forums which is the most extensive Clipsal C-Bus Home Automation specific community forum on the web run by many ex Clipsal guys and and frequented (and in some cases moderated) by Clipsal staff. Though it is based in Australia, it has a large international base of posts and contributions. A post on that forum would also likely find you many local contacts in UK etc.

    Good Luck,

    Blacky7
    Nous House - Smart Home... Smart Owner!

    http://www.noushouse.com.au/

  9. #9
    Automated Home Jr Member 21stCenturyElec's Avatar
    Join Date
    Jan 2013
    Location
    Nottingham
    Posts
    26

    Default

    Quote Originally Posted by blacky7 View Post
    Also forgot to mention, if you haven't found it already, try going to CBus Forums which is the most extensive Clipsal C-Bus Home Automation specific community forum on the web run by many ex Clipsal guys and and frequented (and in some cases moderated) by Clipsal staff. Though it is based in Australia, it has a large international base of posts and contributions. A post on that forum would also likely find you many local contacts in UK etc.

    Good Luck,

    Blacky7
    Bloody hell Blacky7 thought my memory was bad!!! it took you 2 months to remember, I would have given up by now.

    Think this post may be a dead and buried, its near enough 3 years old!

  10. #10
    Automated Home Jr Member
    Join Date
    Nov 2011
    Location
    Sydney, Australia
    Posts
    14

    Default

    Quote Originally Posted by 21stCenturyElec View Post
    Bloody hell Blacky7 thought my memory was bad!!! it took you 2 months to remember, I would have given up by now.

    Think this post may be a dead and buried, its near enough 3 years old!
    Hi 21stCenturyElec,

    When the pickings of new posts is slim when you come back, seeing you're here you re-read some of the previous posts, and then rather than waste a visit may choose to elaborate on an earlier post

    ..................................or poke fun at another contributor ............... Great to see you did at least that.


    I'm happy to see some (any) heartbeat returning to the C-Bus forum as obviously it helps Home Owners to have a forum with readers and posters rather than a dead wall of ancient posts. Also, with Google having everything indexed, a three year old question is as relevant to someone wanting the same information today as the original poster's question, so the forum ends up a database of ideas and information.

    So why not add a new thread that everyone can visit, enjoy and get involved in? I've got a truck load of ideas eg Most annoying C-Bus problem, Favourite C-Bus product, neatest rack up job, Best pubs in Adelaide, What CBus product should Clipsal make next? Most annoying Aussie forum pratt!!. Feel free to use any of them....

    Blacky7
    Last edited by blacky7; 1st April 2013 at 02:39 AM.
    Nous House - Smart Home... Smart Owner!

    http://www.noushouse.com.au/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •