Results 1 to 2 of 2

Thread: Replacing PCs in Node Zero

  1. #1
    Automated Home Ninja Andrew Millne's Avatar
    Join Date
    Nov 2007
    Posts
    267

    Default Replacing PCs in Node Zero

    I'm currently using a Jetway J7F2 Mini ITX board with a 1.5Ghz Via Esther processor to run Cortex in a 1u rack mount case. This is more than adequate for Cortex but I do not think it will be sufficient to also run Windows 7 Media Centre to 2, possibly 3 extenders on the network.

    Does anybody have any suggestions for a hardware upgrade ideally to use the same 1u case which is also not particularly deep?

  2. #2
    Moderator toscal's Avatar
    Join Date
    Oct 2005
    Location
    Near Alicante Spain
    Posts
    2,010

    Default

    Have a look on Mini-ITX And scroll down to the projects bit on the right hand side, might give you a few pointers.
    IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.
    www.casatech.eu Renovation Spain Blog

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •