We have some RGB LED strips that we want to use for effect / mood lighting. When we bought them they came with a basic controller that's OK but not brilliant by any means. I am intending to use Idratek to control them. I have found a suitable three channel dimmer that uses 0-10v to control the dimming and intend to use a QAO to control it.
Taking the Hall and Stairs as an example. What we really want to do is very slowly change the colour of the strip, random colours would be nice but when someone walks in change the strip to all channels on, ie white then back again when presence is no longer detected.
Can anybody tell me if this could be achieved and possibly point me in the right direction on how to set it up in Cortex.
- Neil
Taking the Hall and Stairs as an example. What we really want to do is very slowly change the colour of the strip, random colours would be nice but when someone walks in change the strip to all channels on, ie white then back again when presence is no longer detected.
Can anybody tell me if this could be achieved and possibly point me in the right direction on how to set it up in Cortex.
- Neil
Comment