Results 1 to 7 of 7

Thread: Clipsal momentary switches

  1. #1
    Automated Home Guru Wexfordman's Avatar
    Join Date
    Nov 2005
    Posts
    118

    Default Clipsal momentary switches

    Well, as Ive recently rewired and replaced all my clipsal momentary switches I have them available to anyone interested! All plates are single gang uk size as follows:-

    8 single gang with 1 module slot
    7 single gang with 2 module slots
    1 single gang with 4 module slots

    22 clipsal momentary switches for above!

    Regards
    Eamon

  2. #2
    Automated Home Lurker
    Join Date
    Jan 2004
    Posts
    8

    Default

    You got any pics?

  3. #3
    Automated Home Guru Wexfordman's Avatar
    Join Date
    Nov 2005
    Posts
    118

    Default

    Quote Originally Posted by DesG View Post
    You got any pics?
    Hi

    Will get some but am away this week till Sunday so will upas when I get back!
    Regards
    Eamon

  4. #4
    Automated Home Guru Wexfordman's Avatar
    Join Date
    Nov 2005
    Posts
    118

    Default

    Hi,

    I only have one 3 module switch still in place, so the picture is enclosed, but you can see the different variations also on the links below

    plates


    http://www.laser.com/?page=shop/brow...ea19df89ee90a&

    buttons are here, but mine are slightly different, ie push button type as opposed to rocker type

    http://www.laser.com/?page=shop/flyp...b6f808b2fb598&

    As you can see from the picture of my 3 way plate all my modules are the unmarked type

    photo (16).jpg

  5. #5
    Automated Home Lurker
    Join Date
    Jan 2004
    Posts
    8

    Default

    ok, thanks for the pics


    What sort of money are you looking for the lot?

    Cheers, Des.

  6. #6
    Automated Home Guru Wexfordman's Avatar
    Join Date
    Nov 2005
    Posts
    118

    Default

    Hi des,

    I suppose looking at the price of the modules they are about 5 stg each (actually about 9 stg for the ones on laser) so about 100 stg for those if they were new! The plates are about 4 stg each so they would be about 64 stg!


    So I reckon the cost new is about 170 stg! 90 stg and they are yours (you pay for postage, which would have to be registered post).

    Regards
    Eamon
    Last edited by Wexfordman; 5th June 2012 at 12:15 PM.

  7. #7
    Automated Home Guru Wexfordman's Avatar
    Join Date
    Nov 2005
    Posts
    118

    Default

    Okay, I'm obviously overpricing these, so open to offers!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •