I need to automate some lights within a large garage for a client of mine.
The lights are 6 x 5ft (2 x 58w Fluorescent Tubes) that are currently turned on/off by a single switch.
I originally considered the LightwaveRF system but was told it wouldn't handle the load...I'm now looking at the Fibaro Inline Insert 3kw but I'm still not sure if this will be able to handle the load of the fluorescent tubes when they first turn on or off...something about EMS messing with RF switches.
I then guess the Link-Z Vera Lite to enable the switch to be controlled remotely via an internet connected device.
Any help with this would be really appreciated as it's causing me a real headache.
The lights are 6 x 5ft (2 x 58w Fluorescent Tubes) that are currently turned on/off by a single switch.
I originally considered the LightwaveRF system but was told it wouldn't handle the load...I'm now looking at the Fibaro Inline Insert 3kw but I'm still not sure if this will be able to handle the load of the fluorescent tubes when they first turn on or off...something about EMS messing with RF switches.
I then guess the Link-Z Vera Lite to enable the switch to be controlled remotely via an internet connected device.
Any help with this would be really appreciated as it's causing me a real headache.
Comment