Hi Guys,
Im having some trouble generating the relevant auto reflex commands for a PLH module.
I have a very simple setup consisting of a
- DRB with one light connected to relay 2 and and a switch connected to digital input 1.
- PLH with switches connected to both digital inputs.
Within Cortex I have successfully setup the connections so that whenever one of the switches changes logic to high the light on the DRB relay 2 toggles.
I have used the Auto Reflex Creation option from the Reflex Tools screen in order to replicate this behaviour in Reflex. However, only the DRB switch is correctly toggling the light when in Reflex mode.
Am I missing something here? Do I need to do something different for the inputs on the PLH.
The Node Profile Utility shows the following for the DRB and PLH
drb_reflex.jpgplh_reflex.jpg
Any help would be appreciated
Regards
Mark
Im having some trouble generating the relevant auto reflex commands for a PLH module.
I have a very simple setup consisting of a
- DRB with one light connected to relay 2 and and a switch connected to digital input 1.
- PLH with switches connected to both digital inputs.
Within Cortex I have successfully setup the connections so that whenever one of the switches changes logic to high the light on the DRB relay 2 toggles.
I have used the Auto Reflex Creation option from the Reflex Tools screen in order to replicate this behaviour in Reflex. However, only the DRB switch is correctly toggling the light when in Reflex mode.
Am I missing something here? Do I need to do something different for the inputs on the PLH.
The Node Profile Utility shows the following for the DRB and PLH
drb_reflex.jpgplh_reflex.jpg
Any help would be appreciated
Regards
Mark
Comment