Guys I'm in need of some advice......
Here goes, my plan at the moment is ....(see pic below)
All cables (CT100) have been laid round the house, so before I get them plastered into the walls I have a few questions.
I’ve spoken to a few so called professionals regarding my requirements most of whom have advised me that I should connect the main aerial (DAT45) to a run of CT100 directly to the main TV without any breaks, additional amplification or distribution units. Then have the return from the SAT box to go back into the loft which would then be fed into an amplifier/distribution unit for the rest of my televisions.
1. Would this be the best method?
2. Which amplifier/distribution unit would you recommend? (loftbox/Televes/other)
Finally, I live in a extremely bad reception area therefore I’m thinking of keeping the aerial pointing the Relay just in case I receive ghosting on the DAT45 pointing to Crystal Palace. The black box in the diagram above is a wide band combiner to join the signals form the existing aerial and the DAT45. Would this cause any problems?
Please don’t shoot me down if I’ve got anything wrong here, I’m a real novice and am going on only what I’ve read. You’re help is greatly appreciated.
Thank you in advance.
Here goes, my plan at the moment is ....(see pic below)
All cables (CT100) have been laid round the house, so before I get them plastered into the walls I have a few questions.
I’ve spoken to a few so called professionals regarding my requirements most of whom have advised me that I should connect the main aerial (DAT45) to a run of CT100 directly to the main TV without any breaks, additional amplification or distribution units. Then have the return from the SAT box to go back into the loft which would then be fed into an amplifier/distribution unit for the rest of my televisions.
1. Would this be the best method?
2. Which amplifier/distribution unit would you recommend? (loftbox/Televes/other)
Finally, I live in a extremely bad reception area therefore I’m thinking of keeping the aerial pointing the Relay just in case I receive ghosting on the DAT45 pointing to Crystal Palace. The black box in the diagram above is a wide band combiner to join the signals form the existing aerial and the DAT45. Would this cause any problems?
Please don’t shoot me down if I’ve got anything wrong here, I’m a real novice and am going on only what I’ve read. You’re help is greatly appreciated.
Thank you in advance.
Comment