Help with pin configurations

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • jonesysnr
    Automated Home Lurker
    • Dec 2013
    • 2

    Help with pin configurations

    Hi

    I am coming out of the back of a DVR on the VGA port. plugging in a RJ45 converter and I then have a cat 6 cable buried in the wall to my TV. I then some how need to get the cat 6 cable either on to a scart plug or a component cable. This is were I am struggling.

    Please help??????????????????????????????????
  • toscal
    Moderator
    • Oct 2005
    • 2061

    #2
    So you have VGA to RJ45 at one end and at the other end is where you are stuck.
    The main problem is that as its VGA going in it so it will be VGA coming out the other end. It is possible if the TV scart socket supports it. You can get VGA to scart leads, you will also need to make sure its a scart in Lead and not scart out..
    Another option which will work is to get a PC VGA to TV converter. Amazon do one for about 11 pounds.
    Last edited by Otto-Mate; 12 December 2013, 02:06 PM.
    IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.
    Renovation Spain Blog

    Comment

    • jonesysnr
      Automated Home Lurker
      • Dec 2013
      • 2

      #3
      Thank you

      Unfortunately the TV does not have a pc connection, could this be done making the cat 5 to component instead of scart

      Comment

      Working...
      X