Manual Adjusting Z-Wave Thermostatic Radiator Valves
Tim
I had a look at what happens if I manually raise or lower the temperature on my Heat Genius Smart TRV Controller head.
This is what happens: The thermostat sends a message to the Heat Genius controller, informing it about the changes and as far as I can see the Heat Genius Algorithm configuration that resides on the Heat Genius Hub is automatically updated.
I then looked this up in the documentation that came with my Danfoss Z Wave Living Connect LC13
"Danfoss LC13 Z-Wave Documentation
Temperature control and adjustment
The temperature is controlled by the Z-Wave controller, but may be changed at any time using the thermostat’s buttons.
If this is done, the thermostat sends a message to the controller, informing about the changes."
In addition Heat Genius Hub does receive other data directly from their their Smart TRV controller or LC13, the Hub receives information about the Battery Level or how much energy there is left in the batteries within the Smart TRV controller and the current Living Connect clock. As you can see there are informations flowing in both direction.
Originally posted by TimJWatts
View Post
Tim
I had a look at what happens if I manually raise or lower the temperature on my Heat Genius Smart TRV Controller head.
This is what happens: The thermostat sends a message to the Heat Genius controller, informing it about the changes and as far as I can see the Heat Genius Algorithm configuration that resides on the Heat Genius Hub is automatically updated.
I then looked this up in the documentation that came with my Danfoss Z Wave Living Connect LC13
"Danfoss LC13 Z-Wave Documentation
Temperature control and adjustment
The temperature is controlled by the Z-Wave controller, but may be changed at any time using the thermostat’s buttons.
If this is done, the thermostat sends a message to the controller, informing about the changes."
In addition Heat Genius Hub does receive other data directly from their their Smart TRV controller or LC13, the Hub receives information about the Battery Level or how much energy there is left in the batteries within the Smart TRV controller and the current Living Connect clock. As you can see there are informations flowing in both direction.
Comment